33
- (NEW) Reorder tool paths by dragging and dropping.
- (NEW) CTRL-S to run the Save Project command.

31
- (FIX) Wrong DLL shipped on Windows

30
- (FIX) Bug in how the retract height is calculated for simulations.

29
- (FIX) Contour offset roughing problem.

28
- (FIX) Images didn't load with a "jpeg" extension.

27
- (FIX) Holes not always detected from STEP files.

26
- (NEW) Added ramping for roughing toolpaths.
- (NEW) New contour offset toolpath code for roughing to reduce retracts and plunges.

25
- (FIX) Potential error "negative precision" in drill command.

24
- (FIX) Some parameters on Pencil Machining were wrong for bottom side machining.

23
-(FIX) Bug in cutout command.
-(FIX) Bun in the MCF loading code that caused some tool paths not to be loaded.

22
- (FIX) Bug in Set Retract Height command.

21
- (FIX) Unified finishing crash fixed.

20
- (FIX) Windows build was partially broken.

19
- (FIX) Optimize toolpath calculation.
- (FIX) Speed up loading of very large files.
- (NEW) Added Quick Flip job type.

18
- (FIX) Bug in supports command where the wrong size could be used.
- (FIX) Geometry properties command may have the wrong scale.

17
- (FIX) Mach 3 posts no longer output the A axis.
- (FIX) Set Retract and Program Zero commands now use the User Interface units.
- (NEW) MCF files prior to V8 no longer load.

16
- (NEW) Scroll/Zoom enabled on Set Machine Region and Supports commands.
- (NEW) Saved projects (MCF files) will reevaluate their edges when being loaded.

15
- (FIX) "Thick Line" option now works on Mac.
- (FIX) Better edge handling on STEP files.
- (NEW) Hovered lines show in red for Contour and Pocket toolpaths.

14
- (NEW) Changed Edit->Preferences->"Default Units" to "User Interface Units".
- (FIX) Bad units in the Geometry Preferences window.
- (FIX) Resize and Translate Geometry commands now reset the program zero.
- (FIX) If no settings are changed, do not recalculate toolpaths.
- (FIX) Custom machine dimensions were being ignored.

13
- (FIX) Default maximum depth.
- (FIX) OSX Rendering problem.
- (NEW) Shapeoko HDM configuration

12
- (FIX) Trial license date verification.
- (FIX) Units in Pocket/contour toolpaths.
- (FIX) Units in Drill command.

11
- (FIX) Load edges for DXF files.
- (FIX) Make hole detection a little more permissive.

10
- (FIX) LinuxCNC post processors.

9
- (FIX) Allow .jpeg extension for images.
- (FIX) Rendering bug when loading images back-to-back with the same dimensions.
- (NEW) Allow supports to be in any location and perpendicular to the model boundary.

8
- (FIX) Bug reporting version number

7
- (FIX) Crash in cl.cpp, point_line_closer_than and IsWithinRange

6
- (FIX) Crash loading customer STEP file

5
- (NEW) Faster updates to orientation when loading a model
- (NEW) Better edge detection and linking for STL files
- (FIX) More changes to STEP file triangulation

4
- (NEW) Fix license problem.

3
- (NEW) All Pro licenses now work on MacOS.
- (INTERNAL) Better STEP file triangulation.

2
- (NEW) Added STEP file importing on Pro.

1
- (NEW) STEP file loading for Pro licenses.